Simply Wood Elegance Curved Roof Arbour – !!! HALF PRICE SALE !!!

(1 customer review)

£199.99

HIGH Quality Arbour | British made | Pressure treated | Strong robust & very easy to build | FSC Certified

Out of stock

SKU: SW9600114SW Category:

Description

Simply Wood Elegance Curved Roof Arbour – HALF PRICE OFFER WHILE STOCKS LAST

RRP: £399.99 – OUR PRICE ONLY £199.99

  • High Quality Attractive Stylish Arbour Complete With Seat
  • Pressure Treated, Tanilised High Quality Slow Grown Swedish Pine – will withstand all of the UK’s weather conditions and seasons, for years of outside use
  • No Need To Stain Or Treat – can be if required
  • Chunky 70mm Square Posts
  • Square Lattice Trellis Sides – Ideal to grow climbers against if required
  • Optional Additional Corner Trellis Trim
  • FSC Certified
  • Made In Britain
  • Commercial/Contract Quality
  • Easy Assemble – Can be put together in a matter of minutes, roughly 20, one person can do however easier with two people
  • Overnight Next Day Free Of Charge Delivery

 

Approx Dimensions :

 

Height:                                    2220 mm

Length:                                   1360 mm

Width:                                      600 mm

Roof Overhang Width:          1000 mm

Seat Height (from floor):        520 mm

Seat Width:                              500 mm

Post Thickness:                      70 x 70 mm

Click Here For The Assembly Instructions

 

Additional information

Dimensions 137 × 100 × 213 cm

1 review for Simply Wood Elegance Curved Roof Arbour – !!! HALF PRICE SALE !!!

  1. Sue Kent (verified owner)

    The arbour was delivered as loose pieces, nothing was wrapped or protected at all, hence one of the side trellis panels had completely come away from its supporting leg (only held on with weak staples). There was a lot of green discolouration from the pressure treatment used and some black mould, both of which I was told should have been washed off before sending out.
    To get rid of this I sanded every component and then applied 2 coats of good quality waterproofing stain before assembly. It is very heavy and does need 2 people to assemble. I found the seat planks were only nailed to the centre support and popped out as you sat down. I had to screw all the planks down to remedy this. I also found the seat back to be quite high meaning there was a massive gap between the seat and the back so that cushions, books etc. fell through the gap. I shortened both seat back posts by about 3” which rectified this, and at the same time I also tilted it back slightly to make the sitting position more comfortable. My next job is to tilt the seat itself slightly backwards as rain water tends to sit in puddles on the surface.
    All in all it has been a lot of work to prepare, assemble and adjust this arbour to suit but it does look good and is quite sturdy once complete.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…